Here at Abaris International we strongly recommend that you do not add any stickers to a helmet. The reasons for this recommendation are: Stickers can hide cracks and other potential damage. Stickers may eliminate electrical resistance (source: Guidance from the US Occupational Safety and Health Administration)
Does OSHA allow stickers on hardhats?
Question: Are adhesive stickers or paints allowed on protective helmets? Reply: OSHA’s general requirements for PPE are set forth in 29 CFR 1910.132. Both 29 CFR 1910.132 and 1910.135 do not contain provisions that explicitly prohibit painting or the placement of adhesive stickers on helmet shells.
What do stickers on a hard hat mean?
Hard hats are mandatory for all construction workers on the job in Ontario. All construction sites require that workers be trained in occupational health and safety and most contractors issue hard hat stickers attesting that the worker has undergone the training and is authorized to be present on the construction site.
How do you get stickers to stick to helmets?
Once you’ve found the perfect position on your helmet, use your thumb and palm to firmly press the edges of the decal from the center out until it’s tightly attached. If there are any wrinkles, carefully pull up that area and re-stick until the entire decal is completely flat against the helmet.
Do stickers weaken hard hats?
Stickers will not necessarily weaken the hard hats until and unless the adhesive in the sticker reacts adversely with the material of your hard hat.
Do safety helmets expire?
As a general guide, industrial safety helmets should be replaced three years after manufacture, but always check with the manufacturer. Each helmet, when manufactured, has a year and month of manufacture stamped onto the inside of the shell near the peak for easy reading.
Can you place stickers on hard hats?
Pressure sensitive, non-metallic stickers or tape with self-adhesive backing are acceptable on most of today’s hard hats. However there are some general guidelines to follow: Do not use stickers to cover up hard hat damage, and place stickers at least ½ inch from the helmets edge.
Why do construction workers have stickers on their helmets?
A supervisor may use a sticker to display a worker’s training or qualifications. This can quickly identify who is a first responder, EMT or which individuals are trained in things like confined space entry, forklift operation, or traffic control.
Can MSA hard hats be worn backwards?
Use caution before using accessories while wearing an MSA helmet backwards. Wearing a cap with the brim facing the rear may reduce the performance of accessories, such that they may not meet the applicable requirements. Competitor products should not be worn on MSA helmets.
What are helmet stickers made of?
Vinyl stickers are easy to work with and can be formed to fit almost any shape, which makes them the perfect choice to wrap around the rounded sides of a helmet or car.
Is it against OSHA to wear hard hat backwards?
OSHA specifications require that workers wear hard hats the way they were designed to be worn unless the manufacturer certifies that a hard hat can be worn backward. This means that the companies’ hard hats will still protect against top impact when backward as long as the suspension also is turned around.
