Hold the GO button and turn off the printer on mode afterward. While the LEDs for toner, drum, and error are turned on and the Ready LED is off, the GO button will have to be released.

How do I clear my brother low toner?

  1. Open the front cover of the printer.
  2. Press the Clear / Back button.
  3. Press the * button.
  4. Press the 0 button.
  5. Press the 0 button.
  6. Close the front cover.
  7. This will clear the ‘Toner Low’ error and allow for continuous printing.

How do you reset the toner light on a Brother printer?

Turn the printer off. Hold the ‘go’ button (or “start’ button) while turning the printer on. All panel lights should be on. Release the ‘go’ button (or “start’ button).

How do I clear a Brother printer error?

To clear these messages, follow these steps:

  1. Press the ON/OFF key to turn the Brother machine off.
  2. Unplug the Brother machine from the electrical outlet.
  3. Wait approximately ten seconds.
  4. Plug the Brother machine back into the electrical outlet.
  5. Press the ON/OFF key to turn the Brother machine on.

How do I factory reset my HL-2270DW?

Brother HL-2270DW – Factory Reset

  1. Turn off the printer.
  2. Hold the GO button while you turn the printer on. Hold the button until all the LEDs light up and the Ready LED light turns off.
  3. Release GO, all the LEDs will turn off.
  4. Press GO ten (10) times. The printer will automatically restart.

How do I reset my Brother HL L2370DW?

How to reset factory default settings for Brother HL-L2350DW / HL-L2370DW / HL-L2370DW XL printers

  1. Press the up or down arrows to navigate to “Initial Setup” and then press “OK”
  2. Use the up and down arrows again to select “Reset” and then press “OK”

How do I reset my Brother HL 1110 toner?

When a new TN1070 toner is installed in a Brother HL-1110 or HL-1210W printer, a reset gear turns and triggers a switch to reset the toner counter….It’s very easy to do:

  1. Press the power button 7 times to enter continue mode.
  2. Done.
  3. If you want to exit continue mode press the power button 7 times.

How do you replace Toner on Brother printer?

In order to replace the toner cartridge, make sure that the printer is turned on. Now, open the front cover of your Brother Printer. Now, remove the toner cartridge and drum unit assembly from the machine. And push down the green lock lever and remove the toner cartridge out of the drum unit of printer.

How do you reset your brother printer?

Method 1: Turn the Brother printer off and then wait for a few minutes. Open your printer’s cover by either lifting it or lifting a lever on the side. Press the “Cancel” and “Print” buttons at the same time on the printer and then press the “+” button. Press the “OK” or “Enter” key to complete the reset option.

How do you reset a brother laser printer?

Plug the power cord from the outlet and get ready to reset. Press and hold the “go” button located on the printer’s control panel. Set the power on without letting go of the “go” button. Wait until the printer is completely powered up. Release “go” button and wait until the light indicators are stable and begins turning off.

How to factory reset a brother printer?

1. Unplug the interface cable if selecting Network or All Settings.

  • 2. Press Menu .
  • 3. Press the UP OR DOWN ARROW key to choose Initial Setup . Press OK .
  • 4. Press the UP OR DOWN ARROW key to choose Reset . Press OK .
  • 5. Press the UP OR DOWN ARROW key to choose the reset function you want to use. Press OK .