How to Connect a Network PTZ Controller to a DVR or NVR

  1. Press the “SETUP” button on the PTZ controller to begin configuration.
  2. Type in the User and Password of the PTZ controller, and press the Enter button on the controller.
  3. Using the joystick, scroll down and select “Menu Settings”.
  4. Press enter to select “System”

How do I setup my PTZ camera controller?

  1. Press the Cam 1 button.
  2. Hold down the Setup button. (
  3. Set cam 1 to be VISCA, 9600 baud rate.
  4. Select Cam Set and press Enter.
  5. Press enter while the joystick is blinking on Cam 1.
  6. You should now be able to select VISCA as the Protocol, and 9600 as the baud rate.
  7. Repeat this for any additional cameras.

How do I manually add IP camera to DVR?

  1. Connect IP cameras to PoE Switch. You need to have a PoE switch that is 802.3af/at compliant to power the IP cameras.
  2. Configure DVR to your network. Configure the DVR to an IP address that is compatible with your network.
  3. Configure IP cameras to your network.
  4. Add cameras to the XVR using its menu interface.

What are PTZ settings?

PTZ (pan, tilt, and zoom) cameras are devices that can be moved left and right (pan), up and down (tilt), and zoom in and out.

How do I remotely access my IP camera?

How to view your IP camera remotely via a web browser

  1. Find your camera’s IP address.
  2. Open a web browser and type the IP address.
  3. Go to SETTING > BASIC > Network > Information to find the HTTP port number used by the camera.
  4. After you change the port, you will need to reboot the camera in order to save the changes.

What is camera controller?

This a high level controller that provides most of the CameraX core features in a single class. It handles camera initialization, creates and configures UseCase s. It also listens to device motion sensor and set the target rotation for the use cases.

Is there a user manual for the hdhd-TVI DVR?

HD-TVI DVR User Manual CAUTION ・ｬPlease read this user manual carefully to ensure that you can use the device correctly and safely. ・ｬThere may be several technically incorrect places or printing errors in this manual. The updates will be added into the new version of this manual. The contents of this manual are subject to change without notice.

How do I clean the DVR?

Clean only with a dry cloth. ・ｬPlace the device in a well-ventilated area. ・ｬDo not power off the DVR at normal recording condition! The correct operation to shut off DVR is to stop recording, and then shut down the device. ・ｬThis machine is indoor using equipment.

What kind of DVR do you have for high resolution video?

This model is standard 4/8/16 CH 1080P/720P/960H high resolution DVRs, which adopts high performance video processing chips and embedded Linux system.

What should I do after getting the DVR?

Check the unit and the accessories after getting the DVR. Please don窶殳 power up the unit till the physical installation is complete. Notice:1. This series support two SATA hard drives. Please use the hard drive the manufacturers recommend specially for security and safe field. 2.