5-11 Factory Reset

  1. Press the Pause button for two seconds during Print Standby Mode.
  2. Both LEDs will change to orange color and the printer will be set to Stand-along. Configuration Mode.
  3. Press the Feed button at the third LED sequence in 5-2-2 (LED 1 Green / LED.

How do I set up my Bixolon printer?

Connecting the printer

  1. Turn off the power to all devices – PDA, PC (Bluetooth dongle), printer, etc.
  2. Execute the Bluetooth connection program from PDA or PC.
  3. Search the peripheral devices to connect – search the printer.
  4. Register the searched printer (SPP-R200).
  5. Test the connection.

How do you calibrate bixolon?

ANSWER

  1. Turn off the printer in the label mode.
  2. Turn on the power while depressing the Feed button.
  3. Check the printing, and press the power button one more time to use the automatic calibration function.

How do I reset my bixolon?

How to do Factory Reset?

  1. Depress the Pause button for two seconds during Print Standby Mode.
  2. Both LEDs will change to orange color and the printer will be set to Stand-alone. Configuration Mode.
  3. Depress the Feed button at the 3rd LED sequence as shown in section 5-2-2 (Status.

How do I connect my iPad to my Bixolon printer?

You create a Bluetooth connection for the Bixolon SRP-350 by pairing the iPad to the printer.

  1. Tap Settings > Bluetooth.
  2. Swipe the Bluetooth button to the right to enable Bluetooth on the iPad.
  3. Tap the printer you want to pair to your iPad.
  4. Type the PIN.
  5. Tap Pair.

How do I connect my Bixolon printer to my tablet?

1) Turn on the printer. 3) By changing “Disable” in the upper right corner to “Enable,” the following list of Bluetooth-enabled devices are displayed. Select the device you want to connect among the listed devices. 4) After the Bluetooth registration request screen appears as below, enter the password and click OK.

How do I reset my Bixolon SLP dx420?

How do I reset my Bixolon SRP 350ii?

(1) Turn off the printer. (2) Turn on the printer while pressing Function Key . – Press Function key 3 more seconds after turning on the printer. (3) Wait 10 seconds until new IP address is allocated to the printer.

How do I connect Iphone to Bluetooth printer?

To connect your Bluetooth receipt printer:

  1. Visit your iOS device settings.
  2. Open the Square app and tap More.
  3. Select Settings > Hardware > Printers > Create Printer Station.
  4. Enter a name for your printer, and tap No Printer Selected.
  5. Select Connect a Bluetooth Printer and follow the on-screen instructions.

How do I reset my bixolon mobile printer?