Normally waiting for the cycle to end is all you need to do to unlock the door, or turn your washer on if it’s off. If you get stuck, though, you can drain the water from front load washers using the emergency drain hose; once the water is gone, the door will unlock.
How do I change the settings on my Samsung washer?
- Touch Power to turn on the washer, and then turn the Cycle Selector to select a cycle.
- Change the cycle settings (Temp., Rinse, Spin, and Soil) as necessary. Select your desired features (Delay Start, Pre Soak, etc.)
- To cancel the cycle, touch Start/Pause (Hold to Start) again.
What is bedding mode on washer?
Bedding. Definition: For bulky and large items, such as comforters, blankets, rugs and sheets. When To Use It: For all your bedding, all of it. Anything that is heavy, big and bulky… this is your cycle.
What is the key symbol on Samsung washing machine?
1When the key indicator is on, it means the door is locked. and don’t try to force it open maybe you will break the door handle. When the key indicator is off at the display, that means the door can be opened.
How do you reprogram a washing machine?
To reset your washing machine, unplug it from the power outlet. Then, plug the washer cord back into the wall. Finally, open and close the washing machine door six times to send the reset signal to the system components.
How do I troubleshoot my Samsung washer?
Troubleshooting
- Unplug the machine.
- Disconnect the hoses.
- Remove the detergent drawer by pressing the central locking button.
- Open the hatch of the drain filter at the bottom of the front panel.
- Empty the water and clean the filter.
- Put the washer on a side so that you can access the bottom.
How do I reset my Samsung washing machine?
Resetting your washing machine is a simple procedure. Unplug it (or turn off the power at the circuit breaker), wait a short period of time for the electrical charge to dissipate from the washer (typically 1 to 5 minutes at the most), and then plug it back into the wall. That’s all there is to it.