For the color-enhancing sealers, we recommend allowing 24 hours for heavy foot traffic and 48 hours for vehicular traffic. The sealer will be dry to the touch typically within 4-8 hours. Drying time can vary based on environmental conditions (e.g., rain, sun, humidity).
How do you use diamond clear sealer?
Apply sealer uniformly to the concrete using sprayer, then lightly backroll the sealer to ensure even coverage. Maintain a “wet edge” while spraying, and backroll over sprayer lap marks for best appearance.
How do you apply Liqui hard?
Existing (Old) Concrete: Saturate the surface with undiluted LIQUI-HARD by sprayer, squeegee or broom. Keep the surface wet with LIQUI-HARD for a minimum of 30 minutes. (A range of 30 – 60 minutes may be required depending on temperature and conditions.) NOTE: Pay particular attention to porous and/or dry areas.
How do you spray clear Super Diamond?
Product must be sprayed with a high pressure pump-up sprayer equipped with a high solids nozzle, or with an airless industrial sprayer. If roller applied, use a short napped, solvent resistant sleeve. Keep a wet edge while spraying and backroll over sprayer lap marks for best appearance.
How long after sealing concrete can you walk on it?
Typically, it can take anywhere from 10-12 hours to dry before being able to be walked on, but they will continue to harden for up to 48 hours after being applied. Concrete sealed with a urethane coating should not be walked on (with the exception of a recoat), driven on, or wet for at least 36-48 hours.
What is Super Diamond Clear used for?
SUPER DIAMOND CLEAR is a solvent-based curing and sealing compound specially designed to cure new concrete, assuring proper cement hydration and strength gain, while providing a non-yellowing seal to protect and enhance the appearance of concrete.
How long does diamond clear last?
3 years in original, unopened package. Sealing 450 to 550 400 to 450 Older Concrete (11.0 to 13.5) (9.8 to 11.0) Coverage will vary depending on surface porosity and texture. Thick applications or build-up of multiple coats can cause bubbling, whitening, and peeling.
What is the hardening agent in concrete?
Fluosilicate hardeners function by reacting with cement compounds to deposit crystalline fluorides and silica in the pores of the concrete. This makes the concrete harder, stronger and less porous than it had previously been.
How do you harden the surface of concrete?
One of the most common methods for curing concrete is to hose it down frequently with water—five to 10 times per day, or as often as you can—for the first seven days. Known as “moist curing,” this allows the moisture in the concrete to evaporate slowly.
How do you apply concrete sealer?
How to Apply Concrete Sealer
- Remove all oil, grease, stains, dirt, and dust from the concrete.
- Strip any existing sealer from the surface.
- Open up the concrete with an etching solution.
- Apply a thin coat of sealer using a roller or sprayer.
- Wait for the first layer of sealer to dry.
What is the best concrete sealer for my project?
The EUCO Diamond Hard offered by Euclid Chemical is a solid option for a penetrating concrete sealer. Made up of a blend of silicates/siliconates, the Diamond Hard sealer is a powerful option that will penetrate past the small surface pores of the concrete, reacting chemically within the surface of the material to densify and protect the concrete.
How do you use eucomond hard concrete?
Concrete should be pre-dampened in hot weather; apply EUCO DIAMOND HARD when all standing water has disappeared. Apply the EUCO DIAMOND HARD to the concrete surface by low pressure sprayer or by pouring directly onto the surface and distributing evenly by broom or squeegee.
How do you use eucao diamond hard?
Apply the EUCO DIAMOND HARD to the concrete surface by low pressure sprayer or by pouring directly onto the surface and distributing evenly by broom or squeegee. With soft bristle hand brooms or brushes on an auto-scrubber, work the EUCO DIAMOND HARD around the area to be treated and into the surface.
What is the minimum temperature for applying Euco diamond hard?
Air temperature during application must be between 35°F and 100°F (2°C and 38°C). At temperatures below 50°F (10°C), the reaction and “gelling” process of EUCO DIAMOND HARD is slower, so the concrete will need to remain wet with EUCO DIAMOND HARD for a longer period of time.
