It has the standard 3.6-litre V6 180 kW (241 hp) and 330 N⋅m (243 lb⋅ft).
How much horsepower does a L67 have?
Other L67 changes
| RPO | Engine | Peak power |
|---|---|---|
| L67 | 3.8-litre supercharged petrol V6 | 171 kW at 5200 rpm |
How much HP does a VT Commodore have?
Holden Commodore (VT) 5.7 i V8 SS (306 Hp) 2000, 2001, 2002 Specs
| General information | |
|---|---|
| Power | 306 Hp @ 5200 rpm. |
| Power per litre | 54 Hp/l |
| Torque | 460 Nm @ 4400 rpm. 339.28 lb.-ft. @ 4400 rpm. |
| Engine location | Front, Longitudinal |
What is a L36 engine?
The L36 was a 3.8-litre pushrod V6 petrol engine that was used in Holden vehicles from 1995 to 2004.
What does Holden Sv6 mean?
‘Holden Sv6’ meaning The Sv6 is a sportier variant of the V6 Holden Commodore typically used by cocky P plate drivers who cannot drive an 8 cylinder vehicle on their restricted license.
How much does a V6 Commodore engine weight?
Total engine weight is 168kg.
What cars have L67 engines?
L67 SII Supercharged
- 1996–2005 Buick Park Avenue Ultra.
- 1997.5–2004 Buick Regal GS / GSE / GSX (SLP)
- 1996–1999 Buick Riviera (optional 1996-97, std.
- 2004–2005 Chevrolet Impala SS.
- 2004–2005 Chevrolet Monte Carlo SS Supercharged.
- 1996–1999 Oldsmobile Eighty-Eight LSS (limited)
- 1996–2003 Pontiac Bonneville SSEi.
What is a L98?
The L98 is a 6.0L, Gen. 4, small block aluminum engine used in GM’s Australian Holden vehicles between 2006 and 2010. The L98 is a slightly modified version of the L76. Since LS and Vortec engines are so common, they’ve become the go-to performance and swap engines of the modern era.
How much horsepower does a Holden 308 have?
The Holden 308 HP1 engine kit includes a fully machined, blueprinted, & balanced un-assembled short block kit. Including: Pistons, rings, bearings, gaskets….Holden 308 engine – 10.0:1-C/R.
| Cubic Inch | 312 ci |
|---|---|
| Horsepower | 312hp @ 5000rpm |
| Torque | 355 ft/lbs @ 4000rpm |
| Recommended Fuel | 95+ premium unleaded |
How much horsepower does a 3.8 Ecotec have?
Powertrains
| Engine displacement; configuration | Engine | Power |
|---|---|---|
| 3.8 L (3791 cc); V6 | ECOTEC (L36) | 152 kW (204 hp) |
| Supercharged ECOTEC (L67) | 171 kW (229 hp) | |
| 5.7 L (5665 cc); V8 | Generation III Alloy (LS1) | 225 kW (302 hp) |
| 235 kW (315 hp) |
What is a 3800 engine?
The Buick V6, popularly referred to as the 3800 in its later incarnations, originally 198 cu in (3.2 L) and initially marketed as Fireball at its introduction in 1962, was a large V6 engine used by General Motors. The block is made of cast iron and all use two-valve-per-cylinder iron heads, actuated by pushrods.
What is the power of the Holden Commodore supercharged V6?
The Holden Commodore Supercharged V6 belongs to the VY model family from Holden. Its 6 cylinder, overhead valve supercharged powerplant has 2 valves per cylinder and a capacity of 3.8 litres. It develops power and torque figures of 229 bhp (232 PS/171 kW) at 5200 rpm and 375 Nm (277 lbft/38.2 kgm) at 3000 rpm respectively.
What kind of engine does a Holden VY have?
Holden VY Commodore Specifications Specifications of the Holden VY Commodore, Calais Holden Commodore / Calais VY Series Specifications Engines: 3.8L V6: ECOTEC 3800 3.8L Supercharged V6: Supercharged ECOTEC 3800 5.7L V8: GenIII LS1 V8 5.7L V8: High Output 235kW V8 5.7L V8: High Output 245kW V8 Transmissions: 5 speed manual (V6 only): Getrag
When did the Holden L67 Supercharged V6 come out?
Holden L67 supercharged V6 engine (1996-2004) Introduction. The L67 was a supercharged 3.8-litre pushrod V6 petrol engine that was available in Holden vehicles from 1996 to 2004. Developed by GM, the L67 engine was based on the naturally aspirated L36 but had several significant differences.
What kind of engine does a Holden VT Commodore have?
Specifications of the Holden VT Commodore, Calais Holden Commodore / Calais VT Series Specifications Built: 303,895 Engines: 3.8L V6: ECOTEC V6 3.8L Supercharged V6: Supercharged ECOTEC V6 5.0L V8: 5000i V8 5.0L V8: HSV 195kW Option 5.7L V8: GenIII LS1 V8(Series II)
