It’s now known as the 2.4 Tigershark. These engines offer anywhere from 172-285hp, which is reasonable performance for the small design. They also offer solid efficiency and reliability. However, no engine is perfect and that applies to the 2.4L inline-4.
What cars use the Tigershark engine?
The following vehicles are equipped with the 2.4 L Tigershark engine and are included in one or more class action lawsuits:
- 2014–2020 Jeep Cherokee.
- 2017–2020 Jeep Compass.
- 2015–2020 Jeep Renegade.
- 2017–2020 Dodge Journey.
- 2015–2017 Chrysler 200.
- 2013–2016 Dodge Dart.
- 2016–2020 Fiat 500X.
- 2017–2020 Fiat Toro.
Who makes Tigershark engine?
Fiat Chrysler Automobiles
Fiat Chrysler Automobiles (FCA) introduced the 2.4L Tigershark MultiAir II engine back in 2013. The engine was introduced and designed to deliver increased power and torque, while reducing emissions.
Where are Tigershark engines made?
TigerShark production goals were set at 600,000 per year; the engine is used in Cherokee, 200, Dart, Journey, ProMaster City, and Renegade. In January 2015, Chrysler reported that the 2.0 was made in Dundee, Michigan, while the 2.4 was made in Dundee, Saltillo (Mexico), and Trenton (Michigan).
How long will a 2.4 Tigershark engine last?
Whether it is the Tigershark, or the Pentastar, 200 or 300k miles on these engines should be easily achievable as long as regular maintenance is performed.
What is a MultiAir engine?
MultiAir is a hydraulically-actuated variable valve timing and variable valve lift engine technology enabling “cylinder by cylinder, stroke by stroke” control of intake air directly via a gasoline engine’s inlet valves. MultiAir was licensed to the Schaeffler Group in 2011, which also markets the system as Uniair.
Do all Tigershark engines burn oil?
Jeep owners say the 2.4L Tigershark engine consumes a quart of oil every 1,000 miles. Engines that consume a ton of oil are inefficient, irritating, and expensive….Affected Models.
| Make | Model | Generation |
|---|---|---|
| Jeep | Cherokee | Gen 5 (2014-2020) |
| Compass | Gen 2 (2017-2020) | |
| Renegade | Gen 1 (2015-2020) |
Is the Tigershark a turbo?
Jeep vehicles make every adventure memorable. The 2.4L Tigershark MultiAir 2 engine produces 180 horsepower, 170 LB-FT of torque, and can tow up to 2,000 pounds. The 3.2L Pentastar V6 engine produces 271 horsepower, 239 LB-FT of torque, and can tow up to 2,000 pounds.
What is Dodge MultiAir Turbo?
Favorite Features. MULTIAIR ENGINE TECHNOLOGY. Developed by Fiat and fitted to both the 1.4-liter turbo and 2.4-liter naturally-aspirated Dart engines, MultiAir technology individually controls the lift and timing of the engine’s intake valves to improve both performance and fuel economy.
What kind of engine does a Tigershark have?
The 2.4L Tigershark I4 was built with turbo and Supercharging applications in mind. They have a really good head, pistons, rods, forged crank, a strong block with reinforced cylinder walls. We have a good reliable engine in our Renegade with its 2.4L Tigershark engine. The 9 speed transmission (ZF 9HP) is a solid component.
How reliable is the Tigershark?
In this case, oil viscosity/quality and condition are front-page aspects for the 2.4 Tigershark reliability. So far, the main problem for this engine is, yes, oil consumption. More pronounced oil consumption happens with short runs, but it is not always the primary factor.
What are the most common problems with the GEMA Tigershark engine?
A few of the most common problems on the GEMA/FCA 2.4 World Gas Tigershark Engine include: 1 Oil consumption 2 Oil leaks 3 General issues More
Does the Tigershark have excess tailpipe emissions?
The 2.4-liter Tigershark engine may have excess tailpipe emissions, an issue the automaker is sorting out with the EPA and CARB now.
