The Parrot MKi9000 is a Bluetooth screenless hands-free system that blends in seamlessly inside any vehicle. A wireless remote control can be positioned on the steering wheel or dashboard and allows the driver to control all the functions of the MKi9000.
How do I update my parrot MKi9000?
Installing the update file
- Start up the Parrot hands-free kit and select Preferences > Update.
- > Parrot MKi will say “Waiting for update”.
- Connect your USB drive to Parrot MKi using the iPod / USB / jack cable.
- >
- Wait approximately 3 minutes until the message “Update successful” displays.
- Wait until Parrot MKi restarts.
How do I reset my parrot MKi9000 without remote?
When at “Settings” use the Phone Button (accept call button if there are 2 phone buttons) to enter menu and scroll down to “Advanced Settings”. Again, press Phone button to confirm. Scroll down to “Factory Reset” and press Phone button to confirm.
How do I clear the memory on my parrot MKi9000?
You can pair up to 10 devices with the Parrot MKi9000. clear the memory by holding down simultaneously the and button for 3 seconds. Doing so will also delete all your contacts. Note : Only contacts stored in the memory of the phone will be synchronised in the kit’s memory.
How do I turn up the volume on my parrot MKi9000?
Adjusting the volume Use the jog wheel during a call to adjust the communication volume. > The volume setting is saved for subsequent calls. (private conversation), press the button of the Parrot MKi9000. > The call is automatically transferred to the phone.
How do I connect my Iphone to parrot MKi9100?
Press the jog wheel and select Settings > Bluetooth > Paired devices. 2. Select the phone you want to connect to the Parrot MKi9100.
How do I update my Parrot hands free?
On the MKi9200 go into Settings / Advanced / Firmware Update and press centre button to confirm. Within a minute you should see “update in progress” on the MKi9200 screen. After a minute or two the screen will go blank and this is when the unit is being re-programmed.
How do I reset my hands free parrot?
1. Go into Settings / Bluetooth / Paired Devices and click on a phone you wish to remove. Press centre knob and scroll down to “delete”, then press GREEN button to confirm deletion. Repeat this process to remove all paired phones not required.
How do I reset my parrot MKi9000?
How to reset a Parrot MKi9000
- Turn on the MKi9000 and wait about 20 seconds for the kit to fully turn on.
- Press the centre button on the remote and rotate until you get to “Settings”.
- Press and hold the RED and GREEN buttons on the remote control for 2 to 3 seconds.
